FS2602 SO-DIMM

FS2602 DDR5 SO-DIMM Interposer exclusively for use with Keysight U4164A logic analysis modules FuturePlus is the first and only supplier of DDR5 Logic Analyzer tools in the industry. The FS2602 is our the latest logic analyzer probe used to test DDR5 SO-DIMM memory. It is designed to work exclusively with 4 Keysight U4164A logic analysis modules operating in either Quad Sample State or Quarter Channel 10GHz timing modes. This gives the user an extremely effective tool for debugging, testing and verifying DDR5 SO-DIMMs running at ~4000MT/s. Interposer Design – The FS2602 DDR5 SO-DIMM probe does not sacrifice a memory slot, so you can probe any SO-DIMM, even in a fully populated memory bus. All signals are probed passively. Complete and accurate State analysis over 4000MT/s. View Screenshot. Quarter Channel Timing mode provides deep 10GHz asynchronous sampling of all Data signals, the analyzer can be used as a 100 channel scope! Measure signal integrity of each bit on the DDR5 SO-DIMM with Keysight EyeScan application. View Screenshot. Compatible with all JEDEC DDR5 SDRAM /SO-DIMMs. UDIMMs will need the FS2601 and RDIMMs and LRDIMMs will need the FS2600. FS2608 is the Address/Command/Control (CA bits) only DDR5 SO-DIMM Interposer. Quick and easy interposer connection between the DDR5 SO-DIMM memory bus connector and the U4164A-02G Keysight logic analyzer module. Lower Cost and higher signal fidelity with a single probe point and direct to the logic analyzer attach cables. Short DDR5 SO-DIMM probe etch length makes it more reliable in marginal systems*. Logic Analyzer Requirement – (4) U4164A-02G logic analysis modules   *Note: FuturePlus has carefully simulated and designed this DDR5 SO-DIMM probe to...

FS2601 UDIMM

FS2601 DDR5 UDIMM Interposer exclusively for use with Keysight U4164A logic analysis modules FuturePlus Systems provides the first and only DDR5 logic analyzer tools on the market   The FS2601 is one of our newest and fastest logic analyzer probes used to test DDR5 memory. It is designed to work exclusively with 4 Keysight U4164A logic analysis modules operating in either Quad Sample State or Quarter Channel 10GHz timing modes. This gives the user an extremely effective tool for debugging, testing and verifying DDR5 UDIMMs running above 4000MT/s. Interposer Design – The FS2601 DDR5 UDIMM probe does not sacrifice a memory slot, so you can probe any UDIMM, even in a fully populated memory bus. All signals are probed passively. Complete and accurate State analysis  up to and including 4000MT/s. View Screenshot. Quarter Channel Timing mode provides deep 10GHz asynchronous sampling of all Data signals, the analyzer can be used as a 100 channel scope Measure signal integrity of each bit on the DDR5 UDIMM with Keysight EyeScan application. View Screenshot. Compatible with all JEDEC DDR5 SDRAM UDIMMs.  RDIMM/LRDIMMs require the FS2600 and SODIMMs require the FS2602 Quick and easy interposer connection between the DDR5 UDIMM memory bus connector and the U4164A-02G Keysight logic analyzer module. Lower Cost and higher signal fidelity with direct attach cables. Short DDR5 UDIMM probe etch length makes it more reliable in marginal systems.   Note: FuturePlus has carefully simulated and designed this DDR5 UDIMM probe to work in your system and it extends the DDR5 bus less than 1.0 inch. Other factors can have a significant effect on the performance of the whole...

FS2521 DDR4 SO-DIMM

  FS2521 DDR4 SO-DIMM Interposer for use with the U4164A Keysight Logic Analyzer The FS2521 is a logic analyzer probe used to test DDR4 SO-DIMM memory.  When used with the triggering and analysis capabilities of Keysight’s U4164A logic analyzer modules, it gives the user an extremely effective tool for debugging, testing and verifying DDR4 SO-DIMMs.  Now qualified at 3200MT/s!!!!   View video – DDR4 Memory overview   Interposer Design – The FS2521 DDR4 SO-DIMM probe does not sacrifice a memory slot, so you can probe any DIMM, even in a fully populated memory bus. All signals are probed passively. Complete and accurate State analysis up to 3200MT/s. View Screenshot. Use Timing mode for deep asynchronous analysis at 12.5 GHz. Measure signal integrity of each bit on the DDR4 SO-DIMM with Keysight EyeScan application (5ps x 5mV). View Screenshot. Compatible with all 260-pin DDR4 SDRAM SO-DIMM.s Quick and easy interposer connection between the DDR4 SO-DIMM memory bus connector and the U4164A Keysight logic analyzer module. Lower Cost and higher signal fidelity with direct attach cables, no need for the added expense of U4201 cables. An economy version is available, the FS2523 which monitors only the Address, Command and Control signals. Software   The FS2521 includes DDR4 Protocol Analysis Software that provides both configuration files for the U4164A Keysight logic analyzer modules operating in 64 bit environments, as well as a license free copy of the FuturePlus DDR4 Protocol Decoder.   Note: FuturePlus has carefully simulated and designed this DDR4 SO-DIMM probe to work in your system and it extends the DDR4 bus less than 2.0 inches. Other factors can have...

DDR4 DIMM and SO-DIMM Mixed Signal Interposers for Keysight V Series Mixed Signal Oscilloscopes (MSO)

DDR4 MSO Probes The DDR4 DIIM and SO-DIMM Mixed Signal Interposers connect Address, Command and Control signals of a DDR4 bus to the Keysight V-Series Oscilloscopes with the MSO option. These interposers also provide accessibility to DDR4 signals for convenient analog probing. The user can then easily observe both the digital and analog representation of the DDR4 Address, Command and Control bus. Solder down N5541A analog probes purchased separately from Keysight Technologies. FS2588 is for DDR4 DIMM (288 pin) bus, FS2590 is for DDR4 SO-DIMM (260 pin) bus. Quick and easy interposer connection between the DDR4 DIMM or SO-DIMM memory module connector and the Keysight V Series MSOs. Access points for analog probing. See example. All signals are probed passively. Registered and Unbuffered DIMMs and SO-DIMMs are supported. Interposer has minimal signal impact at the probing...

DDR3 DIMM and SO-DIMM Mixed Signal Interposers for Keysight V Series Mixed Signal Oscilloscopes (MSO)

DDR3 MSO Probes The DDR3 DIMM and SO-DIMM Mixed Signal Interposers connect Address, Command and Control signals of a DDR3 bus to the Keysight V-Series Oscilloscopes with the MSO option. These interposers also provide accessibility to DDR3signals for convenient analog probing. The user can then easily observe both the digital and analog representation of the DDR3 Address, Command and Control bus. Solder down N5381B analog probes purchased separately from Keysight Technologies. FS2388 is for DDR3 DIMM bus, FS2389 is for DDR3 SO-DIMM bus. Quick and easy interposer connection between the DDR4 DIMM or SO-DIMM memory module connector and the Keysight V Series MSOs. Access points for analog probing. All signals are probed passively. Registered and Unbuffered DIMMs and SO-DIMMs are supported. Interposer has minimal signal impact at the probing point....
Request More Information/Quote or Call: (603) 472-5905
Send
Request More Information/Quote or Call: (603) 472-5905
Send