FS2521 DDR4 SO-DIMM

  FS2521 DDR4 SO-DIMM Interposer for use with the U4164A Keysight Logic Analyzer The FS2521 is a logic analyzer probe used to test DDR4 SO-DIMM memory.  When used with the triggering and analysis capabilities of Keysight’s U4164A logic analyzer modules, it gives the user an extremely effective tool for debugging, testing and verifying DDR4 SO-DIMMs.  Now qualified at 3200MT/s!!!!   View video – DDR4 Memory overview   Interposer Design – The FS2521 DDR4 SO-DIMM probe does not sacrifice a memory slot, so you can probe any DIMM, even in a fully populated memory bus. All signals are probed passively. Complete and accurate State analysis up to 3200MT/s. View Screenshot. Use Timing mode for deep asynchronous analysis at 12.5 GHz. Measure signal integrity of each bit on the DDR4 SO-DIMM with Keysight EyeScan application (5ps x 5mV). View Screenshot. Compatible with all 260-pin DDR4 SDRAM SO-DIMM.s Quick and easy interposer connection between the DDR4 SO-DIMM memory bus connector and the U4164A Keysight logic analyzer module. Lower Cost and higher signal fidelity with direct attach cables, no need for the added expense of U4201 cables. An economy version is available, the FS2523 which monitors only the Address, Command and Control signals. Software   The FS2521 includes DDR4 Protocol Analysis Software that provides both configuration files for the U4164A Keysight logic analyzer modules operating in 64 bit environments, as well as a license free copy of the FuturePlus DDR4 Protocol Decoder.   Note: FuturePlus has carefully simulated and designed this DDR4 SO-DIMM probe to work in your system and it extends the DDR4 bus less than 2.0 inches. Other factors can have...

DDR4 DIMM and SO-DIMM Mixed Signal Interposers for Keysight V Series Mixed Signal Oscilloscopes (MSO)

DDR4 MSO Probes The DDR4 DIIM and SO-DIMM Mixed Signal Interposers connect Address, Command and Control signals of a DDR4 bus to the Keysight V-Series Oscilloscopes with the MSO option. These interposers also provide accessibility to DDR4 signals for convenient analog probing. The user can then easily observe both the digital and analog representation of the DDR4 Address, Command and Control bus. Solder down N5541A analog probes purchased separately from Keysight Technologies. FS2588 is for DDR4 DIMM (288 pin) bus, FS2590 is for DDR4 SO-DIMM (260 pin) bus. Quick and easy interposer connection between the DDR4 DIMM or SO-DIMM memory module connector and the Keysight V Series MSOs. Access points for analog probing. See example. All signals are probed passively. Registered and Unbuffered DIMMs and SO-DIMMs are supported. Interposer has minimal signal impact at the probing...

FS2520 DDR4 DIMM

FS2520 DDR4 DIMM Interposer exclusively for use with Keysight U4164A logic analysis modules The fastest DDR4 tool in the industry. Capturing Data at 4000+MT/s! View video – DDR4 Memory overview The FS2520 is our newest and fastest logic analyzer probe used to test DDR4 DIMM memory. It is designed to work exclusively with 3 Keysight U4164A logic analysis modules operating in either Quad Sample State or Quarter Channel 10GHz timing modes. This gives the user an extremely effective tool for debugging, testing and verifying DDR4 DIMMs running above 4000MT/s. It’s like having a 100 channel scope. Interposer Design – The FS2520 DDR4 DIMM probe does not sacrifice a memory slot, so you can probe any DIMM, even in a fully populated memory bus. All signals are probed passively. Complete and accurate State analysis over 4000MT/s. View Screenshot. Quarter Channel Timing mode provides deep 10GHz asynchronous sampling of all Data signals, the analyzer can be used as a 100 channel scope Measure signal integrity of each bit on the DDR4 DIMM with Keysight EyeScan application. View Screenshot. Compatible with all 288-pin DDR4 SDRAM UDIMMs, RDIMMs and LRDIMMs. Quick and easy interposer connection between the DDR4 DIMM memory bus connector and the U4164A-02G Keysight logic analyzer module. Lower Cost and higher signal fidelity with direct attach cables, no need for the added expense of U4201 cables. Short DDR4 DIMM probe etch length makes it more reliable in marginal systems.   Note: FuturePlus has carefully simulated and designed this DDR4 DIMM probe to work in your system and it extends the DDR4 bus less than 1.0 inch. Other factors can have a...

FS2512 DDR4 3200 SO-DIMM Interposer

FS2512 DDR4 SO-DIMM Interposer for use with the U4154A/B/64A Keysight Logic Analyzer The FS2512 is a logic analyzer probe used to test DDR4 SO-DIMM memory.  When used with the triggering and analysis capabilities of Keysight’s U4154A/B/64A logic analyzer modules, it gives the user an extremely effective tool for debugging, testing and verifying DDR4 SO-DIMMs.  Now qualified at 3200MT/s!!!! View video – DDR4 Memory overview Interposer Design – The FS2512 DDR4 SO-DIMM probe does not sacrifice a memory slot, so you can probe any DIMM, even in a fully populated memory bus. All signals are probed passively. Read and Write Data signals are probed independently, which optimizes voltage threshold settings for the different burst types. View example. Complete and accurate State analysis up to 3200MT/s. View Screenshot. Use Timing mode for deep asynchronous analysis at 12.5 GHz. Measure signal integrity of each bit on the DDR4 SO-DIMM with Keysight EyeScan application (5ps x 5mV). View Screenshot. Compatible with all 260-pin DDR4 SDRAM SO-DIMM.s Quick and easy interposer connection between the DDR4 SO-DIMM memory bus connector and the U4154A/B/64A Keysight logic analyzer module. Lower Cost and higher signal fidelity with direct attach cables, no need for the added expense of U4201 cables. An economy version is available, the FS2513 which monitors only the Address, Command and Control signals. View video – Memory Test Protocol Solutions Software The FS2512 includes DDR4 Protocol Analysis Software that provides both configuration files for the U4154A/B/64A Keysight logic analyzer modules operating in 64 bit environments, as well as a license free copy of the FuturePlus DDR4 Protocol Decoder. Note: FuturePlus has carefully simulated and designed this...

DDR4 DIMM KS LA Interposer FS2510AB

FS2510AB DDR4 DIMM Interposer for use with the U4154A/B/64A Keysight Logic Analyzer The FS2510AB is a logic analyzer probe used to test DDR4 DIMM memory.  When used with the triggering and analysis capabilities of Keysight’s U4154A/B/64A logic analyzer modules, it gives the user an effective tool for debugging, testing and verifying DDR4 DIMMs. View video – DDR4 Memory overview Interposer Design – The FS2510AB DDR4 DIMM probe does not sacrifice a memory slot, so you can probe any DIMM, even in a fully populated memory bus. All signals are probed passively. Read and Write Data signals are probed independently, which optimizes voltage threshold settings for the different burst types. View example. Complete and accurate State analysis up to 4000MT/s. View Screenshot. Use Timing mode for deep asynchronous analysis at 5 GHz. Measure signal integrity of each bit on the DDR4 DIMM with Keysight EyeScan (5ps x 5mV) application. View Screenshot. Optional FS1070 Pod Kit for operation with the Keysight logic analyzer modules above 2500MT/s. Compatible with all 288-pin DDR4 SDRAM UDIMMs, RDIMMs and LRDIMMs. Quick and easy interposer connection between the DDR4 DIMM memory bus connector and the U4154A/B/64A Keysight logic analyzer module. Lower Cost and higher signal fidelity with direct attach cables, no need for the added expense of U4201 cables. Short DDR4 DIMM probe etch length makes it more reliable in marginal systems. A Satellite probe, FS2514, is available for probing the Control signals of a second slot in the same DIMM Channel. One Pod connection required. An economy version is available, the FS2511 which monitors only the Address, Command and Control signals.   Software The FS2510AB...
Request More Information/Quote or Call: (603) 472-5905
Send
Request More Information/Quote or Call: (603) 472-5905
Send