Specifications - FS3100 32- or 64-bit VME/VXI Analysis Probe

Typical characteristics for the FS3100

• Compatible with 16/32/64 bit VME/VXI bus systems using "B" or "C" cards
• Standards supported (except for capacitive loading)
  • VME Rev. C.1
  • Standard VXI Rev. 1.3
  • VME64 Rev. 1.9
• Accessories required - none
• Power requirements - +5 v @ 600 mA max. from the logic analyzer
• Signal Line loading:
  • VIL = -150 uA, plus 30 pF max on the following signals:
    • DTACT*, berr*, ds01*, WRITE*, AS*, BBSY*, BGIN(3:0)*
  • VIL = -150 uA, plus 25 pF on all other lines
• Environmental Temperature:
  • Operating: 0 to +55 deg C
  • Nonoperating: -40 to +74 deg C
• Altitude:
  • Operating: 4600 m (15,000 ft)
  • Nonoperating: 15,300 m (50,000 ft)
• Humidity: - up to 90% noncondensing.
• Mechanical Drawing

Screen Captures

• Protocol Analysis
• Timing Analysis
• Debugging Aids
• Custom Measurement Setup
• Cross-domain Triggering

Powerful Protocol Analysis
Protocol-sensitive clocking allows the VME, VME64, or VXI protocol decoder to display all bus transactions in an easy to read format.

Accurate Timing Analysis
Matched signal length and low capacitive loading of the VME/VXI signals make the FS3100 ideal for accurate and easy timing analysis.

Back to Top

Debugging Aids
The PCI Analysis Probe software contains pre-defined trigger terms that help track down those hard-to-find bugs.

Back to Top

Custom Measurement Setup
Agilent's Logic Analysis System allows you to construct your own custom measurements with several FuturePlus Analysis Probes. FuturePlus Systems supplies Analysis Probe interfaces for other popular buses such as PCI, PCI Mezzanine Card (PMC), ISA and the SIMM bus to assist you in making multiple-bus measurements.

Back to Top

Cross-domain Triggering
Using multiple FuturePlus Analysis Probes, you can have one trigger the other and view data from multiple buses side by side in the same display.

Back to Top