Characteristics
FS2358B DDR3 1867 DIMM Memory Bus Interposer For use with Tektronix Logic Analyzers
Accurate Protocol and Timing Analysis
The FS2358 DDR3 1333/1600/1867 DIMM memory bus interposer brings bus signals to your
Tektronix logic analyzer via controlled impedance cables for an easy protocol
and timing analysis connection while maintaining signal fidelity. The included
protocol decode software translates the signals into easily understood bus transactions
at the full bus speed. Extensive triggering and store qualification features
are available through the Tektronix logic analyzer. All signals are probed
passively before being sent to the logic analyzer. Burst sizes of 4 and 8
are supported.
DIMMs supported
The FS2358B supports a 240-pin, 64-bit, Unbuffered or Registered Synchronous
Double Date Rate (DDR) DRAM Dual In-Line Memory Module (DDR SDRAM DIMM). Clock rates from 400 to 667 MHz (800 - 1333 MT/s) DIMM's are supported by the standard product. Adding the optional FS1181 Support Package increases the supported clock rate to 933 MHz (1867 MT/s).
Note: Electrically, the FS2358B extends
the DDR3 bus approximately 1.0 inch in etch length. FuturePlus has carefully simulated and designed the FS2358B to work in your system. Factors that can have a significant effect on the performance
of the whole DDR3 system include the type of memory controller,
the target layout, the type of DIMM used, and which DIMM socket is
being probed. All users are given 30 days to qualify the FS2358B in their system.
