fs2338 & FS2343 System Requirements

Untitled Document

System Requirements - FS2338 & FS2343 FBD Channel Analysis Probes

Agilent 16900-series Logic Analysis Systems

See the table below for FS2338 and FS2343 protocol analysis requirements.
The FS2338 and FS2343 make connection and termination to the logic analyzer with the E5378A Termination Adapter. Up to 5 are required.
The FS2338 and FS2343 FBDIMM Probes requires up to five logic analyzer cards depending on what decode information is required by the user. There are several different configuration files provided for the applications shown in the table below. Note: all these configurations require the use of 16753/4/5/6 or 16950 cards and Dual Sample Mode in the Logic Analyzer.
A logic analyzer pod has 17 channels
Click Here for information on Off Line Analysis support for this product
We recommend you use the latest Agilent operating software to insure you will get the best performance from FuturePlus products. To get the latest 1680/1690/16900 logic analyzer software click here.

Agilent 16900-series Configurations

High Speed Channel	Analyzer Type	Probe Configuration	Protocol Analysis (with up to 4 GHz Timing Zoom)
4.8 Gb/s	16753/754/755/756 16950	10 lane SB with 8 Trigger bits	3 cards configured as one module, one dual sample state machine
4.8 Gb/s	16753/754/755/756 16950	14 lane NB with 9 Trigger bits	4 cards configured as one module, one dual sample state machine
4.8 Gb/s	16753/754/755/756 16950	14 lane NB and 10 lane SB with 5 Trigger bits	5 cards configured as one module, one dual sample state machine
4.8 Gb/s	16753/754/755/756 16950	12 lane NB and 10 lane SB with 10 Trigger bits	5 cards configured as one module, one dual sample state machine

Agilent 16900-series Modules

16900/902/903 Modules	Description	Pods Available
16753-756A dual sample	800 Mb/s State/1.2 GHz Timing, 4 GHz Timing Zoom	2
16950A dual sample	800 Mb/s State/1.2 GHz Timing, 4 GHz Timing Zoom	2

FS2338 Fully Buffered
DIMM Analysis Probe

FS2343 FBD Interposer
Analysis Probe