fs2334 System Requirements

Untitled Document

System Requirements - FS2334 DDR2 DIMM Analysis Probe

Agilent 16900-series Logic Analysis Systems

See the table below for FS2334 protocol or timing analysis requirements.
The FS2334 makes connection and termination to the logic analyzer directly with included cables. No termination adapters are required.
The FS2334 requires up to seven logic analyzer cards depending on whether protocol (double probed) or timing measurements are being used, and the type of logic analyzer card being used. For protocol measurements, 1 card is used for A/C/C, 3 cards are used for Writes, and 3 cards are used for Reads. Two 16900-series logic analysis systems must be used, with 4 cards in one and 3 in the other.
Alternate logic analyzer module configurations for this product
A logic analyzer pod has 17 channels
Click here for information on Off Line Analysis support for this product
We recommend you use the latest Agilent operating software to insure you will get the best performance from FuturePlus products. To get the latest 1680/1690/16900 logic analyzer software click here.

DDR Memory Bus Speed	Analyzer Type	Timing Analysis	Protocol Analysis (with up to 4 GHz Timing Zoom)
800 MT/s (PC6400)	16753/754/755/756 16950	2 cards configured as one timing machine	7 cards configured as one state analysis machine

16900/902/903 Modules	Description	Pods Available
16753-756A dual sample	800 Mb/s State/1.2 GHz Timing, 4 GHz Timing Zoom	2
16950A/B dual sample	800 Mb/s State/1.2 GHz Timing, 4 GHz Timing Zoom	2

FS2334 DDR2 800
DIMM Analysis Probe