FS2331 System Requirements

Untitled Document

System Requirements - FS2331 DDR 333 DIMM Analysis Probe

Agilent 16700-series Logic Analyzers

See the table below for FS1107 and FS2331 protocol analysis requirements.
Timing analysis requires two cards configured as one module with one timing machine.
The FS2331 makes connection and termination to the logic analyzer with either the Agilent E5378A or E5385A Termination Adapters. The FS1107 uses either an Agilent E5346A termination adapter or the "flying lead" adapter, both of which include the connection and termination for the logic analyzer.
The FS2331 requires one analyzer machine that captures Data, and another analyzer machine that captures Commands. The cards required are shown below. The cards in the two machines don't have to be the same model number, but they must be in the same family due to the type of connector on the cables coming from the card. The 16717 through 16752 are in the 3M family, and the 16753 through 16760 are in the Samtec family.
Alternate logic analyzer module configurations for this product
A logic analyzer pod has 17 channels
Click Here for information on Off Line Analysis support for this product
We recommend you use the latest Agilent operating software to insure you will get the best performance from FuturePlus products. To get the latest 1670/16700 logic analyzer software go to Agilent's web site.

DDR Memory Bus Speed	Analyzer Type	Protocol Analysis (with up to 4 GHz Timing Zoom)
200 MT/s (PC1600)	16717/718/719	3 cards: 1 card module with one 167 MHz state machine for Commands 2 card module with one 333 MHz state machine for Data
200 MT/s (PC1600)	16750/751/752	2 cards: 2 cards module with two 200 MHz state machines, one with 2 pods for Commands and one with 6 pods for Data.
266 MT/s (PC2100)	16717/718/719	3 cards: 1 card module with one 167 MHz state machine for Commands 2 card module with one 333 MHz state machine for Data
266 MT/s (PC2100)	16750/751/752	3 cards: 1 card module with one 200 MHz state machine for Commands 2 card module with one 400 MHz state machine for Data
266 MT/s (PC2100)	16760	5 cards: 1 card module with one 200 Mb/s state machine for Commands 4 card module with one 400 Mb/s state machine for Data
333 MT/s (PC2700)	16753/754/755/756	3 cards: 1 card module with one 200 MHz state machine for Commands 2 card module with one 400 MHz state machine for Data
333 MT/s (PC2700)	16760	5 cards: 1 card module with one 200 Mb/s state machine for Commands 4 card module with one 400 Mb/s state machine for Data

16700/702 Modules	Description	Pods Available
16717-718-719A	167 MHz State/333 MHz Timing, 2 GHz Timing Zoom	4
16717-718-719A turbo	333 MHz State/333 MHz Timing, 2 GHz Timing Zoom	lose one pod per machine
16740-741-742A	200 MHz State/400 MHz Timing, 2 GHz Timing Zoom	4
16750-751-752A	200 MHz State/400 MHz Timing, 2 GHz Timing Zoom	4
16750-751-752A turbo	400 MHz State/400 MHz Timing, 2 GHz Timing Zoom	lose one pod per machine
16753-756A	300 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom	4
16753-756A turbo mode	600 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom	lose one pod per machine
16760A	1250 MHz State, Half Channel- 800 Mb/s Mode	2

FS2331 DDR 333
DIMM Analysis Probe