Specifications - FS2100 and FS2101 PCI Bus 33 MHz, 64-bit Active Analysis Probe and Extender Card

Characteristics
The following operating characteristics are not specifications, but are typical operating characteristics for the PCI Active Analysis Probe module.

Probe Interface Compatibility - 32/64 bit PCI Local bus accepting the short card length and universal connector pinout. All PCI local bus ground pins of the universal board pinout are connected to the ground plane of the PCI Active Analysis Probe module.

PCI Present Pins - The PCI signals PRSNT1# and PRSNT2# are routed to the PCI Active Analysis Probe extender card connector.

Standards Supported - The PCI Local Bus Specification Revision 2.1

Minimum Clock Period - 0 to 33 Mhz PCI clock for State mode and 0-100 Mhz for Timing Mode.

Signal Loading - The FS2100 & FS2101 logic analyzer interface presents only one electrical load on each PCI bus signal. However, the extender card connector is an additional 4 inches beyond the maximum allowed stub length.

Supported Operations - All PCI Local Bus operations supported.