Features - FS2100 and FS2101 PCI Bus 33 MHz, 64-bit Active
Analysis Probe and Extender Card

• Accurate Analysis for 5.0V or 3.3V systems and add-in cards.
• Reliable and accurate 32 and 64-bit PCI bus monitoring.
• Complete State Analysis to 33 MHz.
• Accurate Timing Analysis to 500 MHz (Logic Analyzer) or 4GHz (High Speed Timing Analyzer).
• Logic Analyzer Configuration Software gets you up and running fast.
• Front panel switches allow the user to suppress the acquisition of IDLE and WAIT states.
• Optional demuxing of the entire 32 or 64 bit AD lines allows the address to be held throughout the cycle for easy triggering and performance analysis.
• 15 cycle and transaction identifiers allow for easy triggering on various PCI conditions and Compliance Violations.
• PCI Triggering Application note included!
• PCI bus transaction inverse assembly software designed for easy software and hardware debug.
• Short card form factor and simple logic analyzer connection allows easy in-system debug.
• Onboard parity checking in real-time. The Analysis Probe generates parity and checks it against the parity seen on the bus. If an error is detected it is signaled to the logic analyzer.
• Support for Agilent's System Performance Analyzer allows key PCI performance metrics to be viewed in chart or histogram mode.
• Test points give access to high speed timing analysis or an oscilloscope.

• Master Abort
• Address Valid
• Data Valid
• Data Parity Valid
• Retry
• Wait Cyclecaused by slow DEVSEL
• Wait Cycle initiated by the Target
• Wait Cycle - initiated by the Master
• Target Abort
• End Of Transaction
• Transaction (stays true for the entire transaction)
• Latched Grant (stays true for the entire transaction for easy store qualification)
• Idle
• Analysis Probe-detected data parity errors
• Latched command and address lines held throughout the transaction makes triggering a snap!