fs2009 System Requirements

Untitled Document

FS2009 System Requirements for Agilent 16700 Series

For 32-bit protocol analysis, the FS2009 requires 4 logic analyzer pods
For 64-bit protocol analysis, the FS2009 requires 6 logic analyzer pods
For 16700 / 16702 logic analyzer modules 16717-719 and 16750-752, you will need one Agilent E5385A Termination Adapter for each two pods to connect to the FS2009. (Click here for termination adapter details.)
For 16700 / 16702 logic analyzer modules 16753-754-755-756, you will need one Agilent E5378A Termination Adapter for each two pods to connect to the FS2009. (Click here for termination adapter details.)
A logic analyzer pod has 17 channels.
Pods operate as 32 channel pairs. For example, if 5 pods are actually connected the 6th pod cannot be used for anything else.
In the 32 bit mode, if you want to probe the JTAG or IntA-D signals you will need an additional pod with flying leads. In the 64-bit mode you will need an additional logic analyzer module (3 total).
In the 32 bit or 64 bit modes, if you want to probe the JTAG or IntA-D signals you will need an additional pod with flying leads.
We recommend you use the latest Agilent operating software to insure you will get the best performance from FuturePlus products. To get the latest 1670/16700 logic analyzer software go to Agilent's web site.

16700/702 Modules	Description	Available Pods
16717-718-719A turbo	333 MHz State/333 MHz Timing, 2 GHz Timing Zoom	3
16750-751-752A	400 MHz State/400 MHz Timing, 2 GHz Timing Zoom	4
16750-751-752A turbo	400 MHz State/400 MHz Timing, 2 GHz Timing Zoom	Lose one pod per machine
16753-756A	300 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom	4
16753-756A turbo mode	600 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom	Lose one pod per machine

FS2009 PCI-X™ 2.0 Bus Analysis Probe