Product


Previous Page
Home
Contact Us

Termination Adapters

A Termination Adapter provides the correct impedance match and physical connection between an Agilent Logic Analyzer and many FuturePlus Systems analysis probes. The Termination Adapter includes channels for logic signals, clocks and terminations for the logic analyzer located at the probe tip for the most convenient and best measurement results. Termination adapters starting with an "E" are available from Agilent. The FS1026 is available from FuturePlus Systems.

Table 1 will help you choose the correct Termination Adapter for your application.

Table 2 shows technical specifications and the Agilent cross reference number. Refer to the System Requirements section of each product to determine the correct number of Termination Adapters you will need.

Table 3 shows drawings and photos of each Termination Adapter

Table 4 shows which analysis probes use Mictors and which use Samtecs.
If an Analysis Probe is not listed, it does not use Termination Adapters.

Table1 - Choosing a Termination Adapter

Logic Analyzer Used	Adapters for Probes With Mictor Connectors	Adapters for Probes With Samtec Connectors
1660, 1670 series benchtops (3M - 40 pin conn)	E5346A	E5385A
1680, 1690 series benchtops (3M - 40 pin conn)	E5346A	E5385A
All 16500-series modules (3M - 40 pin conn)	E5346A	E5385A
16715, 16716, 16717 (3M - 40 pin conn)	E5346A	E5385A
16740, 16741, 16742 (3M - 40 pin conn)	E5346A	E5385A
16750, 16751, 16752 (3M - 40 pin conn)	E5346A	E5385A
16753, 16754, 16755, 16756 (Samtec - 90 pin conn)	E5380A	E5378A or FS1026
16760 (Samtec - 90 pin conn)	E5380A	E5378A or FS1026
16910A, 16911A (3M - 40 pin conn)	E5346A	E5385A
16950 (Samtec - 90 pin conn)	E5380A	E5378A or FS1026

Table 2 - Termination Adapter Specifications

Product	Channels	Configuration	Maximum Data Rate	Minimum Signal	Equivalent Load Capacitance
E5346A	34 - 32 data, 2 clock	40 pin LA to 38 pin Mictor	LA rate	500 mV p-p	3.0 pF
E5378A	34 - 32 data, 2 clock	90 pin LA to 100 pin Samtec	1.5 Gb/s	250 mV p-p	1.5 pF
E5385A	34 - 32 data, 2 clock	40 pin LA to 100 pin Samtec	1.5 Gb/s	500 mV p-p	1.5 pF
E5380A	34 - 32 data, 2 clock	90 pin LA to 38 pin Mictor	600 Mb/s	300 mV p-p	3.0 pF
FS1026	34 - 32 data, 2 clock	90 pin LA to 100 pin Samtec, right angle	1.5 Gb/s	250 mV p-p	1.5 pF

Table 3- Termination Adapter Drawings

Termination Adapter

Mechanical
Dimensions

Drawing

Equivalent Load

Photo

E5346A

E5378A

E5385A

N/A

E5380A

N/A

FS1026

N/A

N/A

Table 4- Termination Adapter Type by Analysis Probe

Analysis Probe	Description	Termination Adapter Style Used
FS2005	64-Bit PCI Analysis Probe & Interposer, 66 MHz, 3.3v	38 pin Mictor
FS2006	64-Bit PCI Analysis Probe & Interposer, 66 MHz, 5v	38 pin Mictor
FS2009	64 bit PCI-X 2.0 266 MT/s Analysis Probe	90 pin Samtec
FS2010	64 bit PCI-X 1.0 133 MT/s Analysis Probe & Interposer	90 pin Samtec
FS2104	FS2105, delete E2929A	38 pin Mictor
FS2105	64 bit PCI-X 1.0 Bus Analysis Probe, 133 MHz	38 pin Mictor
FS2220	32-Bit AGP Probe/Interposer	38 pin Mictor
FS2240	HyperTransport 8 bit Analysis Probe-RN connection	90 pin Samtec
FS2241	HyperTransport 8 bit Analysis Probe-Probe8 connection	90 pin Samtec
FS2243	HyperTransport 8 bit Analysis Probe-Soft Touch conn.	90 pin Samtec
FS2320	DIMM Analysis Probe & Extender	38 pin Mictor
FS2331	DDR333 DIMM Advanced Analysis Probe	90 pin Samtec
FS2332	DDR2 667 DIMM Analysis Probe/Interposer	90 pin Samtec
FS2333	DDR333 SO-DIMM Basic Bus Analysis Probe/Interposer	90 pin Samtec
FS2336	DDR400 DIMM Basic Bus Analysis Probe/Interposer	90 pin Samtec
FS2337	DDR2 SO-DIMM Basic Bus Analysis Probe/Interposer	90 pin Samtec
FS2338	FBD Bus Slot Analysis Probe	90 pin Samtec
FS2340	FBD Validation DIMM Analysis Probe	90 pin Samtec
FS2343	FBD Bus Interposert Analysis Probe	90 pin Samtec
FS3030	EIO Analysis Probe/Interposer	38 pin Mictor
FS4320	FibreChannel 2 Gbps Analysis Probe	38 pin Mictor

Termination Adapters

Request a quote

Site Use Policy