Previous Page
Home
Contact Us

This page provides answers on some of the more common questions we receive regarding our PC133 Analysis probes. A special thanks to all our customers who take the time to call us with suggestions.

Q. Which DIMM's does your FS2321 Analysis Probe Support?

A. The FS2321 supports any 168-pin SDRAM DIMM operating at or below 133 MHz.

Q. How does the Agilent logic analyzer connect to the FS2321 PC133 Analysis Probe?

A. The FS2321 includes 6 controlled impedance cables that are connected to 40 pin connectors. These connectors plug into the pods from the Agilent logic analyzer. The necessary impedance matching networks are mounted on the FS2321.

Q. What software is included with the FS2321 PC133 Analysis Probe?

A. Files are included that automatically set up your Agilent logic analyzer for state analysis mode and label all the signal names. Another file is the inverse assembler, which translates the signals into bus transactions.

Q. Are you able to disassemble (Read, write, burst cycle...) SDRAM cycle?

A. Yes.

Q. How do I find out what are the latest versions of Agilent logic analyzer operating software?

A. Contact your nearest Agilent Call Center.

Q. How do I know which Agilent logic analyzer is best for my needs?

A. Click here.

Have a question you don't see answered? Contact Technical Support for a prompt answer.