FS4400 PCI Express Protocol Analysis Probe

• Data acquisition up to 2.5 Gb/s
• Spread spectrum clocking support
• Packet level decode
• Support for Ordered Sets, TLP, DLLP and Electrical Idle
• Fast Training Sequence (without extension bit) synchronization in 10-14 FTS's
• 8b and 10b decoding (10b mode requires external reference clock)
• 24-byte pattern matching sufficient for the maximum PCIe header size in 8-bit decoding mode
• Packet recognizers - 3 per link
• Software controlled Polarity Inversion and Lane Reversal
• Filtering (store qualification) by traffic class or virtual channel
• Jitter specification (valid data eye) - 140 ps
  (.65 Unit Interval)
• 2 Link Processors
• 2 Reference clocks
• Power Requirement - +5V DC (external supply included)
• USB connector for probe control from a PC or the logic analyzer

The FS4400 includes the following components:

• Main Processor Board and Enclosure
• Reference Clock Cable Assembly (permanently attached)
• Protocol Decode Software for Agilent Logic Analyzer
• Probe Manager Software for a PC or the logic analyzer
• External 5V Power Supply
• USB Cable
• Getting Started Guide
• User's Manual