Follow Us On
System Requirements
| 
FS4430 DisplayPort Analysis Probe
For Use With Agilent Logic Analyzers
- Logic Analyzer modules with either 40-pin or 90-pin connectors are supported, without the need for termination adapters.
- A logic analyzer pod has 17 channels
- Click Here for information on Off Line Analysis support for this product
- We recommend you use the latest Agilent operating software to insure you will get the best performance from FuturePlus products. To get the latest 16900 logic analyzer software click here.
- The FS4430 can analyze either the Main Link OR the Aux Channel individually OR both buses simultaneously.
- The FS4430 requires two machines if both buses are being analyzed simultaneously. The 1680x-series cannot be divided into two machines in turbo (option 500) mode. So, the 1680x-series could be used if you are looking at the 1.6 GB/s Main Link and Aux Channel. If you are looking at the 2.7 GB/s Main Link, you will not be able to see the Aux Channel simultaneously.
|
Lane Width >
|
Main Link X1, X2, X4 -
1.6 GB/s |
Main Link X1, X2, X4 -
2.7 GB/s |
Aux Channel
|
| LA Input Frequency |
160 MHz
|
270 MHz
|
100 KHz
|
| Channels |
68
|
68
|
68
|
| 16750-752 |
4 pods
|
Requires 2 cards in turbo mode, 4 pods total
|
4 pods
|
| 16753-756 |
4 pods
|
4 pods
|
4 pods
|
| 16910 |
4 pods
|
6 pods (requires Turbo mode, 4 pods total)
|
4 pods
|
| 16911 |
4 pods
|
Requires 2 cards in turbo mode, 4 pods total
|
4 pods
|
| 16950 |
4 pods
|
4 pods
|
4 pods
|
16900-series Logic Analysis Modules
|
16900-Series Modules
|
Description
|
Pods Available
|
| 16750-751-752A | 400 MHz State/400 MHz Timing, 2 GHz Timing Zoom | 4 |
| 16753-756A | 300 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom | 4 |
| 16910A | 250 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom | 6 |
| 16911A | 250 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom | 4 |
|
16950A
|
300 MHz State/1.2 GHz Timing, 4 GHz Timing Zoom | 4 |