DDR3 DIMM 1867 and SO-DIMM 1600
Mixed Signal Interposers
For Use With Tektronix Mixed Signal Oscilloscopes

DIMMs supported
The FS2380, FS2381 and FS2382 Mixed Signal Interposers (MSI) support a 1.5 V. 240-pin, 64-bit, Unbuffered or Registered Synchronous Double Date Rate (DDR) DRAM Dual In-Line Memory Module (DDR SDRAM DIMM). Clock rates up to 933 MHz (1867 MT/s) DIMM's are supported by the standard product.

SO-DIMMs supported
The FS2385, FS2386 and FS2387 SO-DIMM Mixed Signal Interposers (MSI) support a 1.5 V. 204-pin, 667 MHz clock (1600 MT/s data rate), 64-bit, Unbuffered Synchronous Double Date Rate (DDR) DRAM Small Outline Dual In-Line Memory Module (DDR SDRAM SO-DIMM).

Interposers
Note: Electrically, the DDR3 Mixed Signal Interposers extend the DDR3 bus approximately 1.0 inch in etch length. FuturePlus has carefully simulated and designed the interposers to work in your system. Factors that can have a significant effect on the performance of the whole DDR3 system include the type of memory controller, the target layout, the type of DIMM or SO-DIMM used, and which DIMM or SO-DIMM socket is being probed. All users are given 30 days to qualify the DDR3 Mixed Signal Interposer in their system.