FS2354 DDR3 1600 SO-DIMM Analysis Probe
Agilent Logic Analyzer Support

Q. Which SO-DIMMs does the FS2354 DDR3 SO-DIMM interposer support?

A.  The FS2354 supports a 204-pin, 667 MHz clock (1600 MT/s data rate), 64-bit, Unbuffered Synchronous Double Date Rate (DDR) DRAM Small Outline Dual In-Line Memory Module (DDR SDRAM SO-DIMM). Registered and non-registered SO-DIMM's are supported.

Q. Can you guarantee the FS2354 will operate correctly in my system?

A. A good question. Electrically, the FS2354 extends the DDR3 bus approximately 1.0 inch in etch length. FuturePlus has carefully simulated and designed the FS2354 to work in your system. Factors that can have a significant effect on the performance of the whole DDR3 system include the type of memory controller, the target layout, the type of DIMM used, and which DIMM socket is being probed. All users are given 30 days to qualify the FS2354 in their system.

Q. How does the FS2354 set sampling points for read and write traffic?

A. The FS2354 uses the Agilent EyeScan feature to do this.

Q. Does the FS2354 DDR Protocol Decoder display ECC?

A. Yes

Q. What software is included with the FS2354 DDR3 interposer?

A. The protocol decoder and the logic analyzer config files are included.

Q. Does your probe get its power from my system?

A. No. The FS2354 does not have any active circuitry.

Q. How do I find out what are the latest versions of Agilent logic analyzer operating software?

A. Contact your nearest Agilent Call Center.

Q. How do I know which Agilent logic analyzer is best for my needs?

A. Click here.

Have a question you don't see answered? Contact Technical Support for a prompt answer.